hit by a vehicle in the USA!
Don't Get Hit. BE SMART - BE SEEN!
FREE SHIPPINGWith your order of $99 or more!
The Official Website of Bright Ideas USA, LLC, the TRUSTED Name in Night Visibility Gear
| || |
OUT OF STOCK! Wireless LED and Laser Lane Bike Blinker and Tail light
OUT OF STOCK!
This WIRELESS LED & Laser bike blinker and taillight does it all, with NO wires! It is real bright too! Constructed well and packaged nicely, this piece will surely last for years to come. The LED blinkers light up as flashing amber arrows, either right or left, alerting motorists and other cyclists when you are planning to make a turn. Hold either of the two arrow buttons for 3 seconds, and both flashers will rapid-flash simultaneously as Hazard lights. The LED taillight is red, and has 3 modes: steady, flash, or chasing. These all alert motorists to your presence. For added protection, the Laser beams create a lane behind you, sending a clear message to motorists "Stay Out!". The laser beams have 2 modes: Steady and Flash. Flash conserves battery power, while helping grab attention. Turn them all on together: the arrows in hazard mode, the taillight in flash mode, the laser beams in flash mode, and you'll be stopping traffic!
The wireless control console attaches to your front handlebar (or you can keep it on your person). It has 4 buttons - one to control the right blinker, one for the left, one for the rear light, and one for the laser beam. Each of the 3 features (blinkers, rear light, and laser) operate independently of each other. A real plus with this device is that the control console shows you which mode each of the lights are currently in, so you have no need to second guess and there are no unpleasant surprises - oops, my rear light was off the entire time, and I thought it was on!
You will get what you pay for when you invest in this solid piece!
Takes 2 AAA Batteries for the rear light and 1 cell battery for the control console. All batteries are included. The manufacturer even throws in a mini-screwdriver so you can get in the batteries easily!
IN STOCK. READY TO SHIP TODAY!
Note: When you receive the light, you may need to "pair" the remote to the light. It's simple (Instructions are included with the light as well). First, be sure batteries are inserted in both the remote and the light. If batteries are correctly inserted, the blue LEDs on the remote will work, as will the red LEDs on the taillight. Now, press the button on the taillight for 5 seconds, until it begins to flash. Next, press both arrow buttons on the remote simultaneously for 6 seconds. The LED's that were flashing on the taillight will turn off. You are all set!
Have a question about this product? Ask here! We will answer you shortly.
Q:bought the product and is not pairing The key is not blue
A:Yes, we were just alerted to this problem. Some of the lights controls have come with a dead cell battery. There should be an extra cell battery included in the box. Here is how to switch the cell battery. If it is too difficult, you can send it back with First Class Mail and we will do it for you and reimburse you for the shipping back.
1. Unclip the mount from from the control 2. Remove the 4 screws on the back of the control with the screw driver included. 3. Inside you will need to remove 2 additional screws on the inside in order to switch the battery. 4. switch the cell battery and put the control back together.